Here you have the link:
T710XXU2CPD9_T710BTU2CPD9_BTU.zip
Just downloaded from www.sammobile.com T710XXU2CPD9_T710BTU2CPD9_BTU/ and re-uploaded to MEGA.
I can upload to more sites if you want.
Tested and working on my spanish sm-t710, in my case I had my device rooted and with TWRP, as well as a 5.1.1 Optimal Rom.
After following this instructions, somehow i didn't loose any personal data or installed aplication, so this guide will just update our device from lollipop rom to Marshmallow BUT we will loose root. If you didn't had root before following this guide, you can root the tab before of after it, but I recomend you to first install TWRP and backup personal data before following this guide.
->Enable USB Debugging on your tab.
->Make sure you have Samsung drivers installed on your PC.
->Download and extract the zip file to get the firmware file which is in .tar.md5 extension.
->Download and extrat Odin from here: Odin3_v3.10.7.zip
1->turn off your tab and boot it into the Download Mode. To do this, turn off your device and then press and hold Volume Down + Home + Power buttons simultaneously for 2-3 seconds. When you see the warning screen with a yellow triangle sign, press the Volume Up/Down key to enter Download/Odin mode.
2->Download the required Odin.zip file and extract the file on your PC. You will get the Odin3_v3.10.7.exe file. Open it as the administrator to get to the Odin window.
3->Connect your Galaxy device to the computer using the USB cable.
4->When you connect the device, the ID: COM port on Odin will turn Blue. You'll also see"Added!!" message to indicate successful connection. If Odin des not detect your tab, try to reinstall drivers, try another usb cable and another usb port.
5-> Check "AP" box and click on AP. A window will pop up, just go to the folder where you extracted the firmware and select T710XXU2CPD9_T710BTU2CPD9_HOME.tar.md5 file.
6->Now Odin is checking MD5 and will freeze for a minute or so, but don't worry, just let Odin work.
7->Click on the "Options" section and make sure that only the Auto Reboot and F. Reset Time boxes are checked. (Do not, in any case, check Re-Partition box).
8->Now, click the Start button on Odin to begin firmware installation.
10->Once you get a PASS! message on Odin, your device will restart. It's the green signal that indicates a successful installation.
11->Once our device restarts, you can disconect it.
12-> Enjoy Marshmallow :fingers-crossed: on our 8" Tab s2 (First boot will last for some minutes, just be patient! :laugh: )
T710XXU2CPD9_T710BTU2CPD9_BTU.zip
Just downloaded from www.sammobile.com T710XXU2CPD9_T710BTU2CPD9_BTU/ and re-uploaded to MEGA.
I can upload to more sites if you want.
Tested and working on my spanish sm-t710, in my case I had my device rooted and with TWRP, as well as a 5.1.1 Optimal Rom.
After following this instructions, somehow i didn't loose any personal data or installed aplication, so this guide will just update our device from lollipop rom to Marshmallow BUT we will loose root. If you didn't had root before following this guide, you can root the tab before of after it, but I recomend you to first install TWRP and backup personal data before following this guide.
Instructions:
Requirements:
->Enable USB Debugging on your tab.
->Make sure you have Samsung drivers installed on your PC.
->Download and extract the zip file to get the firmware file which is in .tar.md5 extension.
->Download and extrat Odin from here: Odin3_v3.10.7.zip
Installation:
1->turn off your tab and boot it into the Download Mode. To do this, turn off your device and then press and hold Volume Down + Home + Power buttons simultaneously for 2-3 seconds. When you see the warning screen with a yellow triangle sign, press the Volume Up/Down key to enter Download/Odin mode.
2->Download the required Odin.zip file and extract the file on your PC. You will get the Odin3_v3.10.7.exe file. Open it as the administrator to get to the Odin window.
3->Connect your Galaxy device to the computer using the USB cable.
4->When you connect the device, the ID: COM port on Odin will turn Blue. You'll also see"Added!!" message to indicate successful connection. If Odin des not detect your tab, try to reinstall drivers, try another usb cable and another usb port.
5-> Check "AP" box and click on AP. A window will pop up, just go to the folder where you extracted the firmware and select T710XXU2CPD9_T710BTU2CPD9_HOME.tar.md5 file.
6->Now Odin is checking MD5 and will freeze for a minute or so, but don't worry, just let Odin work.
7->Click on the "Options" section and make sure that only the Auto Reboot and F. Reset Time boxes are checked. (Do not, in any case, check Re-Partition box).
8->Now, click the Start button on Odin to begin firmware installation.
10->Once you get a PASS! message on Odin, your device will restart. It's the green signal that indicates a successful installation.
11->Once our device restarts, you can disconect it.
12-> Enjoy Marshmallow :fingers-crossed: on our 8" Tab s2 (First boot will last for some minutes, just be patient! :laugh: )
from xda-developers http://ift.tt/1SWiyfJ
via IFTTT
No comments:
Post a Comment